China Stud Link Anchor Chain Am1 Black Painted 48× 192/50× 200/52× 208mm for Marine and Fishing High Tension Rust-Proof excavator chain bush

Merchandise Description

OUR Merchandise

Stud hyperlink Anchor Chain AM1 Black Painted  48×192/50×200/52×208mm for Maritime and Fishing Higher Stress Rust-Evidence

 

 

D(Φ)   DIAMETER CHAIN Hyperlink Measurement AM1              U1 STUD Website link CHAIN AM2              U2 STUD Link CHAIN AM3              U3 STUD Hyperlink CHAIN APPROX.   Fat
OUTSIDE   Length OUTSIDE  WIDTH PROOF   LOAD BREAKING   LOAD PROOF   LOAD BREAKING   LOAD PROOF   LOAD BREAKING   LOAD 27.5M
INCH MM MM MM MM KN KN KN KN KN KG
one/2 12.five 75 forty five 46 66 66 ninety two ninety two 132 ninety eight.00 
9/sixteen fourteen eighty four 50.four fifty eight 82 82 116 116 a hundred sixty five 119.00 
5/8 sixteen ninety six 57.6 76 107 107 150 a hundred and fifty 216 156.00 
11/sixteen seventeen.5 one hundred and five 63 89 127 127 179 179 256 186.00 
three/four 19 114 sixty eight.four 105 one hundred fifty a hundred and fifty 211 211 301 230.00 
13/sixteen twenty.five 123 73.8 123 a hundred seventy five one hundred seventy five 244 244 349 260.00 
7/8 22 132 79.two 140 200 two hundred 280 280 401 300.00 
fifteen/sixteen 24 a hundred and forty four 86.4 167 237 237 332 332 476 370.00 
one-1/16 26 156 ninety three.six 194 278 278 389 389 556 431.00 
one-1/8 28 168 one hundred.8 225 321 321 449 449 642 496.00 
1-3/16 thirty 180 108 257 368 368 514 514 735 564.00 
1-1/4 32 192 a hundred and fifteen.two 291 417 417 583 583 833 635.00 
one-5/sixteen 34 204 122.four 328 468 468 655 655 937 712.00 
one-7/16 36 216 129.6 366 523 523 732 732 1050 800.00 
one-1/two 38 228 136.8 406 581 581 812 812 1160 887.00 
1-9/16 40 240 one hundred forty four 448 640 640 896 896 1280 1032.00 
1-5/eight 42 252 151.2 492 703 703 981 981 1400 1084.00 
one-3/four 44 264 158.four 538 769 769 1080 1080 1540 1197.00 
1-thirteen/16 46 276 165.six 585 837 837 1170 1170 1680 1310.00 
1-7/8 48 288 172.8 635 908 908 1270 1270 1810 1438.00 
two fifty 300 one hundred eighty 686 981 981 1370 1370 1960 1546.00 
2-1/16 fifty two 312 187.2 739 1060 1060 1480 1480 2110 1661.00 
two-1/8 54 324 194.four 794 1140 1140 1590 1590 2270 1791.00 
2-3/16 fifty six 336 201.six 851 1220 1220 1710 1710 2430 1926.00 
2-5/sixteen 58 348 208.eight 909 1290 1290 1810 1810 2600 2086.00 
two-3/8 60 360 216 969 1380 1380 1940 1940 2770 2249.00 
2-7/sixteen 62 372 223.two 1030 1470 1470 2060 2060 2940 2361.00 
2-1/two sixty four 384 230.4 1100 1560 1560 2190 2190 3130 2516.00 
2-9/16 66 396 237.6 1160 1660 1660 2310 2310 330 2676.00 
2-eleven/16 68 408 244.eight 1230 1750 1750 2450 2450 3500 2885.00 
two-3/4 70 420 252 1290 1840 1840 2580 2580 3690 3571.00 

 

 

 

 

 

Our Services

1. Prompt reply for inquiry within 24 hours

2. One on one service guarantees you the best purchasing experience.

3. Strong production capacity and professional complex engineer can gusrantee the shipping and delivery time and high quality.

4. Strict high quality manage.

To Be Negotiated 1 Ton
(Min. Order)

###

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Alloy
Surface Treatment: Polishing
Feature: Rust-Resisting Material
Chain Size: D3mm-D64mm
Structure: Welded Chain

###

Samples:
US$ 150/Ton
1 Ton(Min.Order)

|
Request Sample

###

Customization:

###

D(Φ)   DIAMETER CHAIN LINK SIZE AM1              U1 STUD LINK CHAIN AM2              U2 STUD LINK CHAIN AM3              U3 STUD LINK CHAIN APPROX.   WEIGHT
OUTSIDE   LENGTH OUTSIDE  WIDTH PROOF   LOAD BREAKING   LOAD PROOF   LOAD BREAKING   LOAD PROOF   LOAD BREAKING   LOAD 27.5M
INCH MM MM MM MM KN KN KN KN KN KG
1/2 12.5 75 45 46 66 66 92 92 132 98.00 
9/16 14 84 50.4 58 82 82 116 116 165 119.00 
5/8 16 96 57.6 76 107 107 150 150 216 156.00 
11/16 17.5 105 63 89 127 127 179 179 256 186.00 
3/4 19 114 68.4 105 150 150 211 211 301 230.00 
13/16 20.5 123 73.8 123 175 175 244 244 349 260.00 
7/8 22 132 79.2 140 200 200 280 280 401 300.00 
15/16 24 144 86.4 167 237 237 332 332 476 370.00 
1-1/16 26 156 93.6 194 278 278 389 389 556 431.00 
1-1/8 28 168 100.8 225 321 321 449 449 642 496.00 
1-3/16 30 180 108 257 368 368 514 514 735 564.00 
1-1/4 32 192 115.2 291 417 417 583 583 833 635.00 
1-5/16 34 204 122.4 328 468 468 655 655 937 712.00 
1-7/16 36 216 129.6 366 523 523 732 732 1050 800.00 
1-1/2 38 228 136.8 406 581 581 812 812 1160 887.00 
1-9/16 40 240 144 448 640 640 896 896 1280 1032.00 
1-5/8 42 252 151.2 492 703 703 981 981 1400 1084.00 
1-3/4 44 264 158.4 538 769 769 1080 1080 1540 1197.00 
1-13/16 46 276 165.6 585 837 837 1170 1170 1680 1310.00 
1-7/8 48 288 172.8 635 908 908 1270 1270 1810 1438.00 
2 50 300 180 686 981 981 1370 1370 1960 1546.00 
2-1/16 52 312 187.2 739 1060 1060 1480 1480 2110 1661.00 
2-1/8 54 324 194.4 794 1140 1140 1590 1590 2270 1791.00 
2-3/16 56 336 201.6 851 1220 1220 1710 1710 2430 1926.00 
2-5/16 58 348 208.8 909 1290 1290 1810 1810 2600 2086.00 
2-3/8 60 360 216 969 1380 1380 1940 1940 2770 2249.00 
2-7/16 62 372 223.2 1030 1470 1470 2060 2060 2940 2361.00 
2-1/2 64 384 230.4 1100 1560 1560 2190 2190 3130 2516.00 
2-9/16 66 396 237.6 1160 1660 1660 2310 2310 330 2676.00 
2-11/16 68 408 244.8 1230 1750 1750 2450 2450 3500 2885.00 
2-3/4 70 420 252 1290 1840 1840 2580 2580 3690 3010.00 
To Be Negotiated 1 Ton
(Min. Order)

###

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Alloy
Surface Treatment: Polishing
Feature: Rust-Resisting Material
Chain Size: D3mm-D64mm
Structure: Welded Chain

###

Samples:
US$ 150/Ton
1 Ton(Min.Order)

|
Request Sample

###

Customization:

###

D(Φ)   DIAMETER CHAIN LINK SIZE AM1              U1 STUD LINK CHAIN AM2              U2 STUD LINK CHAIN AM3              U3 STUD LINK CHAIN APPROX.   WEIGHT
OUTSIDE   LENGTH OUTSIDE  WIDTH PROOF   LOAD BREAKING   LOAD PROOF   LOAD BREAKING   LOAD PROOF   LOAD BREAKING   LOAD 27.5M
INCH MM MM MM MM KN KN KN KN KN KG
1/2 12.5 75 45 46 66 66 92 92 132 98.00 
9/16 14 84 50.4 58 82 82 116 116 165 119.00 
5/8 16 96 57.6 76 107 107 150 150 216 156.00 
11/16 17.5 105 63 89 127 127 179 179 256 186.00 
3/4 19 114 68.4 105 150 150 211 211 301 230.00 
13/16 20.5 123 73.8 123 175 175 244 244 349 260.00 
7/8 22 132 79.2 140 200 200 280 280 401 300.00 
15/16 24 144 86.4 167 237 237 332 332 476 370.00 
1-1/16 26 156 93.6 194 278 278 389 389 556 431.00 
1-1/8 28 168 100.8 225 321 321 449 449 642 496.00 
1-3/16 30 180 108 257 368 368 514 514 735 564.00 
1-1/4 32 192 115.2 291 417 417 583 583 833 635.00 
1-5/16 34 204 122.4 328 468 468 655 655 937 712.00 
1-7/16 36 216 129.6 366 523 523 732 732 1050 800.00 
1-1/2 38 228 136.8 406 581 581 812 812 1160 887.00 
1-9/16 40 240 144 448 640 640 896 896 1280 1032.00 
1-5/8 42 252 151.2 492 703 703 981 981 1400 1084.00 
1-3/4 44 264 158.4 538 769 769 1080 1080 1540 1197.00 
1-13/16 46 276 165.6 585 837 837 1170 1170 1680 1310.00 
1-7/8 48 288 172.8 635 908 908 1270 1270 1810 1438.00 
2 50 300 180 686 981 981 1370 1370 1960 1546.00 
2-1/16 52 312 187.2 739 1060 1060 1480 1480 2110 1661.00 
2-1/8 54 324 194.4 794 1140 1140 1590 1590 2270 1791.00 
2-3/16 56 336 201.6 851 1220 1220 1710 1710 2430 1926.00 
2-5/16 58 348 208.8 909 1290 1290 1810 1810 2600 2086.00 
2-3/8 60 360 216 969 1380 1380 1940 1940 2770 2249.00 
2-7/16 62 372 223.2 1030 1470 1470 2060 2060 2940 2361.00 
2-1/2 64 384 230.4 1100 1560 1560 2190 2190 3130 2516.00 
2-9/16 66 396 237.6 1160 1660 1660 2310 2310 330 2676.00 
2-11/16 68 408 244.8 1230 1750 1750 2450 2450 3500 2885.00 
2-3/4 70 420 252 1290 1840 1840 2580 2580 3690 3010.00 

drive chain type

Drive chains are used in a variety of industrial applications. Unlike roller chains, which are more efficient in terms of weight and size, drive chains slide on steel guides. Drive chains are often used for dirty work. Here’s what you need to know about the various types of drive chains. In this article, we’ll look at pin chains, engineered steel chains, bushing roller chains, and timing chains. These types are the most common and the most commonly used.

time chain

There are several factors to consider when deciding which drive chain to buy. What matters is how long the chain will last, as the timing chain will stretch over time. However, they are pre-stretched during manufacture to reduce the risk of stretching. Timing chains can also be noisy compared to toothed belt drives, but rails and chain tensioners can alleviate this problem. Timing chains also wear slower than belts, reducing repair costs.
Timing chains require little maintenance compared to belt drives. When well lubricated, timing chains require little maintenance. The only maintenance really required is checking the engine oil level and following the manufacturer’s recommended service intervals. Timing chains of drive chains are also safer than belt drives and can be dangerous if the toothed belt tears. Also, the timing chain only needs minor repairs and replacements. Garages can purchase complete timing chain kits that contain all the parts needed for repairs.
Drive chains can be equipped with roller chains or timing chains, depending on the load on the engine. The style of the timing chain depends on the type of motor used. However, the roller chain is the most common choice due to its high strength and NVH properties. The roller chain has two tabs pressed into the eyes, and two rollers above them. These components work together to improve engine performance.
Many modern vehicles use timing chains. Timing gears synchronize the camshaft and crankshaft so that the valves open and close at the appropriate times. This is critical to the running quality, power output, and fuel consumption of the engine. The timing chain also reduces the amount of pollution emitted by the vehicle. Over the past two decades, many OEMs have turned to time chains for OHC/DOHC engines.
chain

pin chain

Steel pivot chains feature open barrels to reduce blocking and material buildup. These chains are designed for power transmission and transportation applications, often used in agricultural applications. They can be custom welded using specialized accessories. These chains can be used in agricultural, industrial and municipal applications. Here’s a closer look at each. Read on to learn about the benefits of steel pivot chains.
The Long Pitch Class 700 Pivot Chain is a versatile chain for conveying and lifting products. Its T-head pins fit snugly so dust doesn’t get into the pin holes. It is also constructed with a closed bearing structure to prevent elongation due to wear. Steel pivot chains are designed for high fatigue applications and are versatile.

Engineering Steel Chain

Engineered steel drive chain provides maximum power transfer while minimizing weight. Engineering chains are often used for tough oil drilling operations. Designed for durability and tight tolerances, these chains can be used in a variety of industrial equipment. Whether you need to lift heavy objects or store a lot of items, engineered steel chains will do the job. Read on to learn more about the benefits of engineering chains.
Engineered steel chains consist of links or pin joints with large gaps between the components. The material of these chains is designed to handle abrasives. While many of these chains are used as conveyors, some are designed for drives. You can find these chains on conveyors, forklifts, bucket elevators, oil rigs and more. To get the most out of them, they should be able to withstand the power produced by the prime mover.
The chain can withstand high tensile stresses and is ductile enough to withstand fatigue. The center-to-center distance between the chain and sprockets is between 30% and 50% of the pitch. On smaller sprockets, the arc of contact between the teeth and chain must be at least 120 degrees. The resistance of the chain drive depends on the use environment, including vibration, noise, fatigue strength and other factors.
There are many types of engineering steel drive chains, each with a different function. The most commonly used type is the elevator. Its lift mechanism raises and lowers the carriage. Most cranes are attached to the load with hooks. Another type of chain is the oval link. Its links are welded and the sprocket has receivers for each link. It is used in low speed applications for elevators, chain hoists and anchors in offshore operations.

Bushing Roller Chain

Typically, a bushing roller chain as a drive chain consists of two link assemblies. The inner link consists of two plates held together by two sleeves, while the outer link consists of two plates connected by pins that pass through the inner link. However, there are some differences between bushing roller chains. The main difference is the type of link and the amount of lubrication required. If you want to learn more about bushing roller chains, keep reading.
While roller chains are generally stronger and more durable than bushing chains, they are not immune to wear. During the driving cycle, they lengthen and undergo a process called articulation. The rate at which they elongate depends on the lubrication and load applied to them. The frequency of pin and bushing articulation is also critical. Like other wear parts, the manufacture of critical wear parts requires close attention to detail to ensure optimum performance. Correct raw material selection, part fabrication, and assembly are key factors in achieving optimum performance. Improperly prepared parts can affect wear life and performance.
Consider your application and load distribution when selecting a bushing roller chain as your drive chain. The length of the chain must be between 30 and 50 times its pitch. The arc of contact between the small sprocket teeth must be at least 120 degrees. The resistance of the drive chain depends on the usage environment, which will determine its fatigue strength and vibration level. It’s a good idea to check the chain length before deciding to replace it.
chain

flat top chain

The TSplus flat top drive chain is the most flexible conveying medium on the market today. They can be connected end-to-end to create extended conveyor lines. The side bend design allows it to be used with a variety of conveyor types including inline, snake, and carousel conveyors. These chains are available in a variety of sizes, ranging in width from 3 feet to 20 feet.
A variety of materials are available for flat-top chains, including steel and plastic. Steel chains are ideal for applications requiring wear resistance. They are sturdy and well made. Plastic chains are particularly durable, but not suitable for harsh environments. Stainless steel flat top chains are suitable for a variety of applications, and some manufacturers make them from stainless steel or even aluminum. If your application requires a durable flat top chain, choose a chain made from iwis hardened stainless steel.
Another type of flat-top drive chain is the side bend chain. Suitable for flexible machinery requiring efficient conveying. It is equipped with a single hinge pin or double hinge pin. Either option will do, but each hinge pin has its advantages. Single hinge pin chains are suitable for smaller light-duty conveyors, while double hinge pins are more suitable for medium and heavy-duty applications.
CZPT is a modular flat top chain conveyor system. Its standardized components and modules can be easily integrated into any production process. And because it’s a single track, you can lengthen or shorten it as needed. Its versatile design makes it compatible with other conveyor systems such as belts and sprockets. This monorail modular design allows system lengths up to 40 meters and is compatible with other conveyor systems.

China Stud Link Anchor Chain Am1 Black Painted 48× 192/50× 200/52× 208mm for Marine and Fishing High Tension Rust-Proof     excavator chain bushChina Stud Link Anchor Chain Am1 Black Painted 48× 192/50× 200/52× 208mm for Marine and Fishing High Tension Rust-Proof     excavator chain bush
editor by czh 2023-01-30